Our products

SKU	Brand	Name	Description	Price
ES000001	Phidgets	1002_0 - PhidgetAnalog 4-Output	PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will be reported when this current	90.00 €
ES000002	Phidgets	1011_0 - PhidgetInterfaceKit 2/2/2	Designed for customers who only need a couple of Analog Inputs, Digital Inputs o Outputs, the dongle size is ideal for project where space is critical	50.00 €
ES000003	Phidgets	1012_2 - PhidgetInterfaceKit 0/16/16	1012_2 PhidgetInterfaceKit 0/16/16. Use it to check the state of switches, push buttons, relays, switch relays, solenoids, and even high power LEDs.	100.00 €
ES000004	Phidgets	1014_2 - PhidgetInterfaceKit 0/0/4	The PhidgetInterfaceKit 0/0/4 Provides a way to interface your PC with higher-voltage devices such as incandescent bulbs, high-power relay, and motor	60.00 €
ES000005	Phidgets	1015_0 - PhidgetLinearTouch	The 1015_0 PhidgetLinearTouch recognizes both contact and proximity and can be used as a slider or a series of buttons. Connects to a USB port.	40.00 €
ES000006	Phidgets	1016_0 - PhidgetCircularTouch	This touch sensor recognizes both contact and proximity and can be used as a scroll wheel or a series of buttons. Connects directly to a USB port.	40.00 €
ES000007	Phidgets	1017_1 - PhidgetInterfaceKit 0/0/8	The 1017_1 - PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 60 Watts.	90.00 €
ES000008	Phidgets	1018_2 - PhidgetInterfaceKit 8/8/8	1018_2 - PhidgetInterfaceKit 8/8/8. Connect analog sensors, control switches, and check on push-buttons. One board handles up to 24 devices.	80.00 €
ES000009	Phidgets	1019_1 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub	1019_1 - PhidgetInterfaceKit 8/8/8 w/6 Port HubConnecting additional USB devices to the 1019 is as easy as plugging them into the on-board 6-port hub.	125.00 €
ES000012	Phidgets	1040_0 - PhidgetGPS	The Phidget GPS provides the longitude, latitude of the board's position in signed decimal degree format Measure global position, velocity and heading	60.00 €

Pages

Like us on Facebook

News from our store

LG-NS robot gripper

Introduction

How can your robot rule the world with an iron fist if it doesn't have any hands? The Little Grip Kit makes a great addition to a small arm or mobile base. The gripper features injection molded components and can use two standard hobby servos (not included) for open and close and wrist rotate. The clamp open to 1.3" and the wrist rotates approximately 180 degrees. It needs only a screw driver for assembly.

0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight, Double-Sided

This connector is a single-row, 40-pin, straight male header strip that can be broken into smaller strips. Both sides of the strip are long, allowing for unique connections that cannot be made

Pololu Qik 2s12v10 Dual Serial Motor Controller

This powerful motor controller allows variable speed and direction control of two large, brushed DC motors using a simple serial interface and provides several advanced features, such as motor acceleration control and configurable current limiting. Automatic baud detection up to 115.2 kbps and inputs for both RS-232 and TTL serial make it easy to add motors to your microcontroller- or computer-based project. The operating voltage range is 6 to 16 V; the continuous current per channel is up to 13 A (30 A peak).

Micro USB to Serial Adapter

Micro USB to Serial Adapter is a usefull tool that allows to connect Personal Computers with any microcontroller system via the USB port. This tiny and lightweight board is only 19x13 mm, including the mini-B connector,

ACS714 Current Sensor Carrier -30A to +30A

This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS.

Propeller Board of Education

The form of the original Board of Education meets the powerful function of the multicore Propeller microcontroller. A built-in set of peripherals makes it ready to support an amazing array of projects, prototypes

3054_0 - SSR Relay Board 0.5A

Rated for 28VAC/0.5A or 40VDC/0.5A switching, this SSR is controlled by a digital output.

Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side.

AD595AQ Temperature Sensor IC, Voltage, ± 3°C, -55 °C, +125 °C

The AD595AQ is a Complete Instrumentation Amplifier with thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a pre-calibrated

Pololu Stamped Aluminum L-Bracket Pair for 37D mm Metal Gearmotors

These aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes six M3 screws for securing the motor

Digital Temperature Sensor with TCN75A

This is a carrier board for the famous Microchip Technology Inc.'s TCN75A digital temperature sensor and it includes all the external components required by the sensor.

Prototyping Shield For Arduino

This is a design for an open-source prototyping shield for Arduino NG/Diecimila. It has tons of cool features, to make prototyping on your Arduino easy. Shipped with fully assembled.

APC Propellers 11X47 Push-Pull Set

APC Propeller pack. Packet includes one Pusher and one Normal plus adapter ring for each.

Precision screwdrivers slot PG1-5 3x150

3052_1 - SSR Relay Board 2.5A

Product Features
Rated for 28VAC/2.5A or 40VDC/2.5A switching, this SSR is controlled by a digital output.

Product Description

Precision screwdrivers Phillips PG2-2/75 3x75

CONTACT, 2.54MM, CRIMP, AWG28-22

The 61900113722DEC is a stamped female Crimp Contact. Made of tin-plated copper alloy for use with a wire size range of 28 to 22AWG. Can be used with 619 0xx 116 21.

1129_1 - Touch Sensor

Product Features
Detect a touch through up to 1/2" of glass or plastic with this low-cost capacitive sensor.

Product Description

The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2”.

3579_0 - Linear Potentiometer - KTC-75mm

This industrial linear potentiometer has 75mm of travel and connects to an analog input.

Digital Green LED Light Module

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

Buy now

The Omron D2F series are ultra subminiature basic switches. These switches incorporate a snapping mechanism made with two highly precise split springs that ensures long durability

T1 (3mm) Yellow LED with Yellow Diffused Lens (10 pcs)

This is a basic, general-purpose yellow LED in a standard T1 (3mm) package with 0.1" lead spacing.

ETH-RLY02 - 16Amp, 2 Channel Relay Module

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which can be regulated or unregulated.

0.100" (2.54 mm) Breakaway Male Header: 2x40-Pin, Straight

This connector is a double-row, 80-pin (2×40), straight male header strip that can be broken into smaller strips.

ACS715 Current Sensor Carrier 0 to 30A

This board is a simple carrier of Allegro’s 30A ACS715 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV when the input current is zero. The typical output error is ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

TTL Serial JPEG Camera with NTSC Video

This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC monochrome video and can take snapshots of that video (in color) and transmit them over the TTL serial link. You can snap pictures at 640x480, 320x240 or 160x120 and they're pre-compressed JPEG images which makes them nice and small and easy to store on an SD card. Perfect for a data-logging, security, or photography project.

Grove - Line Finder

Line finder is designed for line following robotic. It consists two parts - an IR emitting LED and an IR sensitive phototransistor.

Joystick Module for Arduino

Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control

KA7805AETU IC, REG, LDO, 5V, 1A, TO220-3

The KA7805AETU three terminal positive regulator employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible.

3105_0 - Interlink Electronics 1.5″ Square 20N FSR

Product Features
This large, square Interlink FSR has a 1.5" sensing area and measures up to 20 N.

Product Description

The Interlink Force Sensing Resistor has an active sensing area of 1.5” (12.7mm) to sense applied force.

Force Sensing Resistors (FSRs) are very thin, robust, polymer thick film (PTF) devices that decrease in resistance when increased pressure is applied to the surface of the sensor. FSRs are not a load cell or strain gauge devices though they have many similar properties.

3589_0 - CE-IB04-35A2-1.0/±250A DC Current Transducer

This bi-directional current transducer measures ±250 amps DC on a wire that passes through its window.

3135_0 - Micro Load Cell (0-50kg) - CZL635

Product Features
This load cell measures shear force up to 50kg and connects to a bridge input.

Product Description

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, the 1046 PhidgetBridge will perform all the amplification and measurement of the electrical output.

VISHAY SEMICONDUCTOR - 4N25

The 4N25 is an industry standard single channel Phototransistor Coupler with base connection. The optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.

ESC 20 Amp

Features

Extreme low output resistance
Multiple protection features: Low-voltage, cut-off protection / over-heat protection
3 start modes: Normal, Soft, Super-soft
Throttle range can be programmed
Smooth, linear and precise throttle response.

HAMMOND - 1591GFLGY - ENCLOSURE, ABS, FLANGED, GREY

Product Information

ENCLOSURE, ABS, FLANGED, GREY
Enclosure Type: Multipurpose
Enclosure Material: Acrylonitrile Butadiene Styrene (ABS)

1146_0 - IR Reflective Sensor 1-4mm

Measure the distance of an opaque object up to 4mm away using reflected IR light. Connects to a Phidgets Analog Input.

USB 2.0 Cable A male / B male 4.5m

URM ultrasound mounting bracket

This is our URM ultrasonic sensor mounting bracket. It fits URM37 and URM04.

24Mhz 8 Channel Logic analyzer

This is a very affordable 24Mhz 8 Channel USB Logic analyzer. This is a hobbyist level analyzer, ideal for testing your Arduino or other hobbyist microcontroller's communications.

Baby Orangutan B-328 Robot Controller

The Baby Orangutan B-328 is a very compact but complete robot controller, packing a high-performance ATmega328P AVR microcontroller (with 32 KB of program memory and 2 KB of RAM)

Long U-bracket
Long U-bracket + brackets + multi-function aluminum steering servo + Cup persons bearing can be assembled into head, manipulator, robot joints, biomimetic robots and humanoid robots.

DS18B20 Digital temperature sensor + extras

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter.

T1 (3mm) Green LED with Green Diffused Lens (10 pcs)

This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.

Diodes 1N4007 (Bag of 10)

The 1N4007 is a Rectifier Diode for general purposes.

Low Forward Voltage Drop
High Surge Current Capability

TEXAS INSTRUMENTS PTR08060WVD Non Isolated POL DC/DC Converter

The PTR08060WVD is a Non-isolated Adjustable Switching Regulator with wide output voltage and wide input voltage range. The 6A converter provides output current at a much higher efficiency and with much less power dissipation, thereby eliminating the need for a heat sink. Using state-of-the-art switched-mode power-conversion technology, the output voltage can be stepped-down.

1204_0 - PhidgetTextLCD Adapter

Product Features
A dual channel LCD controller that is compatible with HD44780 LCD modules.

Product Description

The PhidgetTextLCD Adapter lets you connect one or two HD44780 LCD modules. The adapter can handle up to 4 lines of 40 characters, depending on the LCD module you are using. You can separately adjust the backlight and the character contrast of each LCD module

SOCKET IC, DIL, 0.3", 8WAY

Product Information

SOCKET IC, DIL, 0.3", 8WAY
Connector Type: DIP
Series: -
No. of Contacts: 8
Pitch Spacing: 2.54mm
Row Pitch: 7.62mm
Contact Termination: Through Hole Vertical

RoboClaw 2x60A Motor Controller with USB (V4)

Overview

The RoboClaw from Ion Motion Control (formally Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor controller. It can supply two brushed DC motors with 5 A, 15 A, 30 A, or 60 A continuous (depending on the model) at voltages from 6 V to 34 V, and it allows for peak currents up to twice the maximum continuous rating.

The RoboClaw features dual quadrature decoding capability. A built-in PID routine can be used for closed-loop speed control, maintaining motor speeds even if the load varies, or the encoder counts and speeds can be read directly from the RoboClaw for use with an external control system. Analog feedback is also supported for closed-loop position control.

2.8'' TFT Touch Shield

2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a 4-wire resistive touch-screen. It is available in an Arduino shield compatible pinout for attach

Basic 16x2 Character LCD - White on Blue 5V

Introduction

Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters.

3027_0 - LCD cable (for 40x4 Screen)

This is the replacement cable for the following LCD Screen:

You are here

Our products

Pages

Features

Overview