Tweezers 102 SA

Tweezers for handling chips or other micro SMD components; less user fatigue due to the particular angle of the tips

Order code	Esd code	Length (mm)	Length (")	Version
102	-	120	4 3/4"	SA

BUY NOW

Like us on Facebook

News from our store

1120_0 - FlexiForce Adapter

Product Features

The FlexiForce adapter allows you to connect one FlexiForce FSR to a Phidgets analog input.

Product Description

The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad.

Digital White LED Light Module

This white LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

1134_0 - Switchable Voltage Divider

Product Features
This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just select the resistance you want and away you go.

Product Description

The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the voltage divider. The resistance values (in Ohms) are 249, 820, 2.61K, 8.45K, 27.4K, 91K, 300K and 1M. It is possible to have multiple switches flipped, putting the corresponding resistors in parallel.

Pololu High-Power Motor Driver 18v25

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.8×0.8-inch board supports a wide 5.5 to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink.

Adafruit Trinket - Mini Microcontroller - 5V Logic

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85,

Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry

Details

These side-entry screw terminal blocks have a pitch of 3.5 mm (0.138″). Each block has two terminals for the stripped ends of 24 – 18 AWG wires, and units can slide together to make longer strips. They are rated for 125 V, 10 A (UL)

Wires are held in place and released from these wire-to-board terminal blocks by the simple adjustment of a screw. These blocks let you easily make temporary connections to your PCB.

Stepper Motor: Bipolar, 200 Steps/Rev

This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 2.7 V, allowing for a holding torque of 1.4 kg-cm (20 oz-in).

QTR-1RC Reflectance Sensor (2-Pack)

The QTR-1RC reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection

SRF08 - High Performance Ultrasonic Range Finder

Communication with the SRF08 ultrasonic rangefinder is via the I2C bus. This is available on popular controllers such as the OOPic and Stamp BS2p, as well as a wide variety of micro-controllers.

Sealed Membrane 4*4 button pad with sticker

Introduction

The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.

Sharp IR Sensor Mounting Bracket

This mounting bracket is designed for Sharp distance measuring sensor

Conductive thread ribbon cable - White - 1 yard

This lightweight, flexible fabric ribbon cable contains four channels of conductive thread, perfect for wiring up wearables where flexibility is key. Use it to connect your conductive fabric gamepad to your microcontroller

Digital Tilt Sensor

This is a digital tilt switch. It can be used as a simple tilt sensor. Simple plug to our IO/Sensor Expansion board, you can make amazing interactive projects.

Pololu 20D mm Metal Gearmotor Bracket Pair

These aluminum gearmotor brackets let you securely mount Pololu’s 29:1, 73:1, and 154:1 20D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M2.5 screws for securing the motor to the bracket. Each bracket also features three mounting holes and ten mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.

USB 2.0 Cable A male / B male 4.5m

3531_0 - Optical Rotary Encoder HKT22

This low-cost encoder is designed to fit on the rear shaft of our stepper motors. Measure the rotation of your motor even when it stalls or missteps.

DFrduino FIO

Introduction

The DFRduino Funnel I/O (Fio) is a board based on the original design of Arduino FIO. It is 100% compatible with original Arduino FIO.

Infrared proximity switch bracket

Introduction

This bracket is designed for Adjustable Infrared Sensor Switch which can be used for the obstacle avoidance it can be easily installed in the robot or other interactive

Baby Orangutan B-328 Robot Controller

The Baby Orangutan B-328 is a very compact but complete robot controller, packing a high-performance ATmega328P AVR microcontroller (with 32 KB of program memory and 2 KB of RAM)

1012_2 - PhidgetInterfaceKit 0/16/16

Product Features

Use it to check the state of switches, push buttons, relays and/or to switch relays, solenoids, motors and even high power LEDs.

Digital Inputs

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

Pololu TReX Dual Motor Controller DMC01

The TReX blends RC, analog, and serial inputs for a powerful motor control solution capable of delivering a continuous 13 A per motor. The TReX will work right out of the box as an electronic speed control (ESC), but its ability to seamlessly transition between RC/analog and serial control makes it capable of so much more!

Orangutan SVP-1284 Robot Controller (assembled)

The Orangutan SVP-1284 robot controller is a super-sized version of our popular Orangutan SV, with a built-in AVR ISP programmer, more I/O lines, and more regulated power,

DC POWER JACK, 2.0MM, 12VDC, 5A, SOLDER

The 722A from Switchcraft is a DC power jack with 2mm diameter pin and solder lugs termination. This version has threaded bushings to allow use of both standard and locking power

Dock station battery BL-5B

Input 4,5-12VDC 400-800mA

DFRduino Nano

The DFRduino Nano USB Microcontroller V3 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The Nano has everything that the Diecimila has (electronically) with more analog

ESC 20 Amp with SimonK

Details

Features

Extreme low output resistance
Multiple protection features: Low-voltage, cut-off protection / over-heat protection
3 start modes: Normal, Soft, Super-soft
Throttle range can be programmed
Smooth, linear and precise throttle response.
Separate voltage regulator IC for onboad microprocessor
Supported motor speed (Max): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles)

ESC 20 Amp

Extreme low output resistance
Multiple protection features: Low-voltage, cut-off protection / over-heat protection

3585_0 - CE-IZ04-35A2-1.0/0-100A DC Current Transducer

This current transducer measures up to 100 amps DC on a wire that passes through its window.

10 Yellow LED 5mm

10 Yellow Leds to bright up your projects.

Pololu Wheel 90x10mm Pair - Black

These black plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our plastic gearmotors with 3mm D-shafts, to make a nice drive solution for small robots

Pololu Wheel 32x7mm Pair - White

These white plastic wheels have silicone tires measuring 32 mm (1.26″) in diameter and press-fit onto the 3mm D output shafts on many of our motors, including our micro metal gearmotors and our plastic gearmotors with 3mm D-shafts. These wheels are sold in pairs.

Micro Metal Gearmotor Extended Bracket (Pair)

This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture

Pololu Micro Serial Servo Controller (assembled)

At only 0.91" x 0.91", the Pololu micro serial servo controller is the smallest serial servo controller you’ll find. With individual speed and range control of eight servos and over 12 bits of resolution,

Pololu 3pi Robot

The Pololu 3pi robot is a complete, high-performance mobile platform featuring two micro metal gearmotors, five reflectance sensors, an 8×2 character LCD, a buzzer, and three user pushbuttons,

1055_0 - PhidgetIR

Product Features
Send and receive IR data with this Phidget. You can even “learn” signals from common devices like your TV’s remote so you can reproduce them.

Product Description

You can use the PhidgetIR to control devices with remote control input - such as your TV or DVD player, from your computer by having the PhidgetIR transmit remote control codes. Your application can learn the signals from arbitrary remote controls. The learned code can be retransmitted and will function just as if you were pushing the same button on the actual remote

2-AAA Battery Holder, Enclosed with Switch

Enclosed battery holder for two AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.

Bipolar (BJT) Single Transistor, PNP

Product Information

TRANSISTOR, PNP, 45V, 0.1A, TO-92
Transistor Polarity: PNP
Collector Emitter Voltage V(br)ceo: 45V
Transition Frequency ft: 320MHz

3261_0 - 12V/0.2Kg-cm/1080RPM 3.7:1 DC Gear Motor

Product Features

This DC motor has a 3.7:1 gearbox, a rated speed of 1080 RPM and rated torque of 0.24 Kg·cm.

Product Description

The 3261 is a 12 volt gear motor, generating 0.24 Kg-cm of torque at 1080 RPM. It's a small, inexpensive motor suitable for low torque, high speed applications. This motor is quite compact considering the amout of power it can output.

3mm Hexagonal Shaft Adapter for LEGO Wheels (Pair)

This adapter allows 3mm hexagonal shafts, the kind found on many Tamiya gearboxes, to be connected to LEGO’s wide variety of high-quality wheels. The adapters are sold in pairs.

3337_0 - Stepper Mounting Bracket (NEMA 11)

Fix a NEMA-11 sized motor or gearbox to a flat surface with this steel mounting bracket.

10 Yellow LED 3mm

This is a basic, general-purpose yellow LED in a standard T1 (3mm) package with 0.1" lead spacing.

SRF10 Mounting Kit

This mounting kit for the SRF10 alows you to easily mount the SRF10, or fit to a servo for panning.

ColorPAL sensor

For sensing color, the ColorPAL uses its LED to illuminate a sample, one color component at a time, along with a broad-spectrum light-to-voltage converter to measure the light reflected back. The amount of light reflected from the sample under illumination from each red, green, and blue LED can be used to determine the sample’s color.

ARM mbed NXP LPC1768 Development Board

The mbed NXP LPC1768 is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a powerful 32-bit ARM Cortex-M3 processor running at 96 MHz with 512 KB flash and 32 KB RAM, which makes it far more capable than popular 8-bit prototyping alternatives. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly, and a free online IDE and C++ compiler means that no software installation is required. Downloading programs is as simple as using a USB flash drive (no external programmer is necessary).

1062_1 - PhidgetStepper Unipolar 4-Motor

Product Features

Accurately control up to 4 unipolar stepper motors with this controller. Connects to a USB port.

Product Description

The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be used in applications that require precise positioning and continuous rotation, at low cost.

3147_0 - Full-bridge Aluminum Strain Gauge (Bag of 2)

Designed for aluminum structures, this strain gauge comes in the full-bridge configuration.

Basic 16x2 Character LCD - White on Blue 5V

Introduction

Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters.

Plugable Terminal sensor adapter

Universal sensor adapter, can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination, can be a simple circuit design, to achieve "Plug and Play."

FLCS-01 FLOAT SWITCH, HORIZ

FLOAT SWITCH, HORIZ
Operating Pressure Max: 5bar
Sensor Body Material: Acetal

Pan and Tilt Kit (Black Anodized) (no servos)

Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware.

You are here

Details

Details

Features