Precision screwdrivers Phillips PG2-2/150 3x150

Order code	Esd code	Tip	Dimensions (mm)	Total length (mm)	Blade (Ømm)
PG2-0	PG2-0D		PH-000 2.5x60	160	2.5
PG2-1	PG2-1D		PH-00 2.5x60	160	2.5
PG2-1/75	PG2-1/75 D		PH-00 2.5x75	175	2.5
PG2-2	PG2-2D		PH-0 3.0x60	160	3.0
PG2-2/75	PG2-2/75 D		PH-0 3.0x75	175	3.0
PG2-2/100	PG2-2/100 D		PH-0 3.0x100	200	3.0
PG2-2/150	PG2-2/150 D		PH-0 3.0x150	250	3.0

BUY NOW

Like us on Facebook

News from our store

Mini Maestro 24-Channel USB Servo Controller (Assembled)

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control

3014_0 - LCD cable (2x8 connector)

This is the replacement cable for the following LCD Screens:

Pololu 20D mm Metal Gearmotor Bracket Pair

These aluminum gearmotor brackets let you securely mount Pololu’s 29:1, 73:1, and 154:1 20D mm metal gearmotors to your project. The brackets are sold in pairs,

Round Solar Panel Skill Badge - 5V / 40mA

This skill badge is a self-fulfilling one! Normally you would get the badge after the project is done, but in this case, the badge can be part of the project! The solar panel is epoxied into a round disc 55mm diameter

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3

We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS breakout board. We believe this is the UltimateGPS module, so we named it

Romeo-All in one Controller

Introduction

RoMeo is an All-in-One Arduino compatible microcontroller especially designed for robotics applications from DFRobot. The Romeo benefits from the Arduino open source platform, it is supported by thousands of open source codes, and can easily be expanded with Arduino Shields. The integrated 2 way DC motor driver and wireless socket allows you to start your project immediatly without the need for an additional motor driver or wirless shield.

3502_0 - i-Snail-VC-50 AC Current Sensor 50Amp

Product Features
The i-Snail VC-50 measures up to 50 amps AC on a wire that passes through its window. Connects to an analog input.

Product Description

The i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).

Nano I / O Shield For Arduino Nano

Introduction

The Arduino Nano I/O Shield acts as a breadkout board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input and the footprint of the DFRduino board is the same as the Arduino Duemilanove. In addition, each pinout includes 5V and GND pins for easy connection to sensors or servos. Unit comes fully assembled. The board also has a space specifically for the DFRobot bluetooth module.

IR Kit For Arduino

Introduction

This IR kit provides a remote control capability to your project.

CONTACT, SOCKET, 22-24AWG, CRIMP

The 90119-2110 is a Crimp Terminal for 90156, 90123, 90142, 90143, 90160 C-Grid III™ modular crimp housing. It accepts 22 to 24 AWG cable conductor size and made of phosphor

Micro Metal Gearmotor Extended Bracket (Pair)

This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture

1019_1 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub

Product Features

A 1018 with an on-board powered 6-port full-speed (12Mbit/s) USB hub.

Product Description

Analog Inputs

The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor.

Sampling rates can be set at 1ms, 2ms, 4ms, 8ms and multiple of 8ms up to 1000ms.

PING))) Ultrasonic Distance Sensor

Our PING)))™ ultrasonic sensor provides an easy method of distance measurement. This sensor is perfect for any number of applications that require you to perform measurements between moving or stationary

Interface Shield For Arduino

This interface shield supports multi-interfaces, SPI interface (directly connected Shiftout module, SPI LCD display module, SPI LED display module), IIC Interface (direct connects IIC lCD display module

Mini Maestro 18-Channel USB Servo Controller (Assembled)

The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control

MiFare Classic (13.56MHz RFID/NFC) Clear Keychain Fob

This is a blank 13.56MHz RFID/NFC keychain fob - often used for keys but also an easy way to tag something.

CMPS10 - Tilt Compensated Compass Module

The CMPS10 module is a tilt compensated compass. Employing a 3-axis magnetometer and a 3-axis accelerometer and a powerful 16-bit processor, the CMPS10 has been designed to remove the errors caused by

LM35 Analog Linear Temperature Sensor

Introduction

The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. The DFRobot LM35 Linear Temperature Sensor can be used to detect ambient air temperature. This sensor is produced by National Semiconductor Corporation and offers a functional range between -40 degree Celsius to 150 degree Celsius. Sensitivity is 10mV per degree Celsius. The output voltage is proportional to the temperature.

1012_2 - PhidgetInterfaceKit 0/16/16

Product Features

Use it to check the state of switches, push buttons, relays and/or to switch relays, solenoids, motors and even high power LEDs.

Digital Inputs

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

Sewable Snaps - 5mm Diameter - Card of 24

The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads!

3147_0 - Full-bridge Aluminum Strain Gauge (Bag of 2)

Designed for aluminum structures, this strain gauge comes in the full-bridge configuration.

DFrduino FIO

The DFRduino Funnel I/O (Fio) is a board based on the original design of Arduino FIO. It is 100% compatible with original Arduino FIO.

Mini Maestro 12-Channel USB Servo Controller (Assembled)

The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.

HEF4521BP IC, 4000 LOCMOS

Product Information

IC, 4000 LOCMOS, 4521, DIP16, 15V
Counter Type: -
Clock Frequency: 35MHz

LM35DZ/NOPB Temperature Sensor IC

The LM35 series are precision integrated-circuit temperature sensors, with an output voltage linearly proportional to the Centigrade temperature.

Linear Actuator with built in Potentiometer

Built in limit switches (non moveable)
Aluminum case
Two clevis mounting points, one on each end (uses our MB1 brackets)

Pololu Simple High-Power Motor Controller 18v25

The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 25 A without a heat sink. It ships with the power capacitor and connectors included but not soldered in, allowing for custom installations.

SRF235 - "Pencil Beam" Ultrasonic Range Finder.

The SRF235 is a narrow beam ultrasonic ranger, with a beam width of just 15°. An industrial high frequency air coupled transducer operating at 235KHz is used for both Transmit and Receive.

3504_0 - i-Snail-S Current Status Switch

Product Features
The i-Snail-S closes an electrical switch when currents greater than 0.15A are detected in the wire that passes through its window.

Product Description

The i-Snail-S switch provides an accurate and cost effective method of monitoring the on/off status of electric loads including fans, pumps, motors, heaters and virtually any AC powered device.

Mini Maestro 24-Channel USB Servo Controller (Assembled)

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed

3916_0 - T5577 RFID Tag - ABS Key Fob

A writable, grey ABS key fob RFID tag. T5577 tags must be written to before use.

6xAA Battery Holder(double layer)

This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.

Arduino Mega ADK Rev3

The Arduino Mega ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones.

Precision screwdrivers slot PG1-2 1.8x60

Magnetic Pin Back

These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets

Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3

Description

The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:

Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.

SN74LS00N - LOGIC, QUAD 2-IN NAND GATE, 14DIP

The SN74LS00N is a four independent 2-input Positive-NAND Gate. The devices perform the Boolean function Y = (A • B)\ or Y = A\ + B\ in positive logic.

1130_0 - pH/ORP Adapter

Product Features
The pH/ORP Adapter connects any of our pH or ORP probes to the analog input on a Phidgets board.

Product Description

The pH/ORP Adapter Interfaces to a pH or ORP glass electrode through a BNC connector and feeds the data to an Analog Input on a PhidgetInterface board.

Digital Blue LED Light Module

Introduction

This Blue LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

Adafruit Wave Shield for Arduino Kit - v1.1

Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to 22KHz, 12bit uncompressed audio files of any length. It's low cost, available as an easy-to-make kit. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read off of an SD/MMC card, which are available at nearly any store. Volume can be controlled with the onboard thumbwheel potentiometer.

3100_0 - 8″ FlexiForce 0-1lb. Resistive Force Sensor

Product Features
This thin FlexiForce sensor is compact and easy to integrate. Requires the Flexiforce adapter and measures up to 1 lb of force.

Product Description

The FlexiForce sensor is an ultra-thin and flexible printed circuit, which can be easily integrated into most applications. With its paper-thin construction, flexibility and force measurement ability, the FlexiForce force sensor can measure force between almost any two surfaces and is durable enough to stand up to most environments.

Arduino Leonardo without headers

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Toggle Switch: 3-Pin, SPDT, 5A

This heavy duty single-pole, double-throw (SPDT) toggle switch makes a great power switch or state selector for user interfaces. It is rated for 5 A at 125 VAC and 2 A at 250 VAC.

499:1 Metal Gearmotor 25Dx58L mm LP 6V

This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 498.87:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the

1040_0 - PhidgetGPS

Product Features

Measure global position, velocity and heading with the Phidget GPS. Best case accuracy of 2.5m CEP.

Product Description

The Phidget GPS provides the longitude and latitude of the board's position in signed decimal degree format. The position accuracy (best case) is 2.5m CEP (Circular Error of Probability).

The 1040 also provides altitude, heading and velocity as well as the time and date. It will also let you know when it has a satellite fix.

0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight, Double-Sided

This connector is a single-row, 40-pin, straight male header strip that can be broken into smaller strips. Both sides of the strip are long, allowing for unique connections that cannot be made with standard male header strips. For example, this header can be used as a female-to-male adapter, and both sides are compatible with wire wrap.

Toggle Switch: 3-Pin, SPDT, 5A

This heavy duty single-pole, double-throw (SPDT) toggle switch makes a great power switch or state selector for user interfaces. It is rated for 5 A at 125 VAC and 2 A at 250 VAC.

LED Voltage Meter (Blue)

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suitable for battery level display. Just apply two wires on the power without any extra circuit or components

3555_0 - ASR2803-3-1M-BNC ORP Lab Electrode

This lab electrode measures the ORP of a solution and connects to the 1130 - pH/ORP Adapter.

Pololu Micro Metal Gearmotor Bracket Extended Pair

This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the Pololu Wheel 42×19 mm and encoder. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.

You are here