SOCKET IC, DIL, 0.3", 18WAY

The 1-390261-5 is a 18-way DIP Socket with 30% glass filled PBT, thermoplastic housing and tin-plated phosphor bronze contacts.

20mR Contact resistance
1000MR Insulation resistance
250VAC/DC Voltage rating
1A Current rating
1000VAC Minimum dielectric withstanding voltage
-40 to 105°C Operating temperature range

Applications

Industrial

Product Specifications, Documents & More

Connector Type: DIP Socket
Contact Material: Phosphor Bronze
Contact Plating: Tin Plated Contacts
No. of Contacts: 18
Pitch Spacing: 2.54mm
Product Range: -
Row Pitch: 7.62mm
SVHC: To Be Advised

Technical Data Sheet (201.28KB) EN

BUY NOW

Like us on Facebook

News from our store

3DR GPS uBlox LEA-6

This is our best GPS module, and significantly outperforms the Mediatek GPS due to the larger antenna and next-gen chipset. Recommended for multicopters and rover in particular, where GPS accuracy is paramount. The device itself is pretty straight-forward. It has active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage. The units will ship pre-configured for ArduPilot Mega use, and the configuration file is available in the repository.

Adafruit Assembled Data Logging shield for Arduino

Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. Not only is it easy to

Grove - Relay

The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards.

10 Green LED 5mm

10 Green LEDs to bright up your projects.

SPELSBERG - 110-411 - ENCLOSURE, POLYSTYRENE

Product Information

ENCLOSURE, POLYSTYRENE
Enclosure Type: Industrial
Enclosure Material: Polystyrene
Body Colour: Grey
External Height - Imperial: 2.48"

DMX-USB-RX-RLY8 4 Relay, 4 Dimmer

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or 12V DC supply, provides 8 Relay outputs.

XBoard-A bridge between home and internet

The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and an ATMega328. This board will add wireless XBee control as well as internet connectivity to your projects. Its great for anything from home automation to robot control. The possibilities are endless!

1064_1 - PhidgetMotorControl HC

Product Features
Control up to two DC motors with this controller. Monitors surges and overheating in the API and connects to a USB port.

Product Description

The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors.

The 1064:

Provides bi-directional control to 2 DC motors
Requires external 6 to 15VDC Power Supply
USB port is isolated from the motor control outputs
Over voltage, over temperature, over current conditions are fed back to the API on the PC

Pololu 12V Step-Up Voltage Regulator U3V12F12

The compact (0.32″×0.515″) U3V12F12 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 12 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

Digital RED LED Light Module

This red LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

Pololu Jrk 12v12 USB Motor Controller with Feedback

The powerful jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used as an open-loop speed control or for closed-loop speed or position control. The continuous output current is approximately 12 A (30 A max) and the operating range of 6–16 V (with transient protection up to 40 V).

VNH5019 Motor Driver Carrier

This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.

Pololu Step-Down Voltage Regulator D24V3AHV

The compact (0.4″ × 0.6″) D24V3AHV switching step-down (or buck) voltage regulator takes an input voltage between 4.5 V and 42 V and efficiently reduces it to a lower, user-adjustable voltage.

3588_0 - CE-IB04-35A2-1.0/±100A DC Current Transducer

This bi-directional current transducer measures ±100 amps DC on a wire that passes through its window.

1032_0 - PhidgetLED-64 Advanced

This Phidget uses PWM to control the brightness of up to 64 LEDs.

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brightness controlled from 0 to 100% within that limit using pulse-width modulation.

Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled)

The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC).

Acrylic Ping))) Stand with Hardware

This handy stand, made of smoke-colored 0.220” thick acrylic, makes it easy to mount a PING))) Ultrasonic Distance Sensor (#28015) to your project. Mounting hardware included.

Round Solar Panel Skill Badge - 5V / 40mA

This skill badge is a self-fulfilling one! Normally you would get the badge after the project is done, but in this case, the badge can be part of the project! The solar panel is epoxied into a round disc 55mm diameter

Orangutan SVP-1284 Robot Controller (assembled)

The Orangutan SVP-1284 robot controller is a super-sized version of our popular Orangutan SV, with a built-in AVR ISP programmer, more I/O lines, and more regulated power,

Joystick Module for Arduino

Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control

Ribbon Cable, 14 Core, 28 AWG, 0.072 mm²

The 191-2801 series planar cable is made of round tinned copper conductor, grey PVC jacket. It is designed for mass termination techniques including Spectra-Strip IDC connectors. With conductor centers the sam

THERMISTOR, NTC, 47K

The NTCLE100E3473JB0 is a standard precision radial leaded NTC Thermistor. These thermistors have a negative temperature coefficient. The device consists of a chip with two solid

MB7383 HRXL-MaxSonar®-WRLST™

Product Description

The weather resistant HRXL-MaxSonar-WR is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.

The HRXL-MaxSonar-WRLST MB7383 ultrasonic sensor features a maximum range of 10 meters to large targets. The MB7383 is our most sensitive long range sensor.

High output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The HRXL‑MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.

Bipolar (BJT) Single Transistor, NPN

The BC547B is a NPN Transistor, suitable for use in driver and output stages of audio amplifier, low noise input stages of tape recorders, Hi-Fi amplifiers and signal processing

Heli-Max Axe CX Nano 2.4GHz RTF Yellow

Heli-Max electric powered, 2.4GHz radio controlled, ready to fly, Axe CX Nano sized Helicopter. Ideal for first-time pilots.

Digital piranha LED light module-Red

Piranha LED light module (Red), and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works.

3258_0 - 12V/1.5Kg-cm/365RPM 10:1 DC Gear Motor

Product Features

This DC motor has a 10:1 gearbox, a rated speed of 365 RPM and rated torque of 1.53 Kg·cm.

Product Description

The 3258 is a 12 volt gear motor, generating 1.53 Kg-cm of torque at 365 RPM. While this motor is small and inexpensive, it is also aggressive- less efficient than the others, but very powerful for its size.

FTDI Basic Breakout 3.3/5V

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards.

APC Propellers 11X47 Push-Pull Set

APC Propeller pack. Packet includes one Pusher and one Normal plus adapter ring for each.

Mini Maestro 24-Channel USB Servo Controller (Assembled)

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed

SRF10 Mounting Kit

This mounting kit for the SRF10 alows you to easily mount the SRF10, or fit to a servo for panning.

Quadcopter Power Distribution Board

This quadcopter PDB can be used with any frame. It distributes power from the flight battery to ESCs to power the Quad's motors. Now comes pre-assembled! No need to solder connectors or wires.

Plugable Terminal sensor adapter
Universal sensor adapter, can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination, can be a simple circuit design, to achieve "

LilyPad Programming Cable

This cable allows to program an Arduino LilyPad board with an USB/serial converter.

3DR GPS uBlox LEA-6

This is our best GPS module, and significantly outperforms the Mediatek GPS due to the larger antenna and next-gen chipset. Recommended for multicopters and rover in particular

3827_0 - Acrylic Enclosure for the 1135

Product Features

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Product Description

The 3827 Enclosure is designed to protect the 1135 – Precision Voltage Sensor while giving you access to all terminals and connectors through openings in the enclosure.

ICSP Programming Socket

Description

The programming of Microchip Technology Inc.'s microcontrollers can be done using different expensive tools, or it can be done directly on the system you are developing by the ICSP technique (In Circuit Serial Programming); the latter method requires that the designer adds to his project an appropiate plug connected to the microcontroller to make programming operations on board.

Relay Shield for Arduino

The DFRobot Relay shield is capable of controlling 4 relays. The max switching power could be DC 90W or AC 360VA. It could be directly controlled by Arduino/DFRduino through digital IOs with external 9v supply. With buildin xbee type socket, it can be wirelessly controlled via Xbee/bluetooth/WPM. Make it an ideal solution for home automation and robotics purpose.

Real Time Clock Module (DS1307)

This is the DS1307 Real Time Clock developed by one of our designer waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST).

T1 (3mm) Green LED with Green Diffused Lens (10 pcs)

This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.

Pololu Ball Caster with 3/8" Metal Ball

This small ball caster uses a 3/8" diameter metal ball. The height of the assembled kit ranges from 0.4" to 0.6".

1116_0 - Multi-turn Rotation Sensor

Product Features

This multi-turn potentiometer measures 10 full rotations, useful for input applications that require a fine adjustment. Connects to an analog input.

Product Description

The 1116 measures 3600 degrees of rotation - 10 full turns. It is typically used in Human Interface Applications such as control panels.

3027_0 - LCD cable (for 40x4 Screen)

This is the replacement cable for the following LCD Screen:

DFRduino Nano

Introduction

The DFRduino Nano USB Microcontroller V3 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The Nano automatically senses and switches to the higher power supply, so there is no need for a power select jumper.

3823_1 - Acrylic Enclosure for the 3060

Product Features
This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

Product Description

The 3823 Enclosure is designed to protect the Rev 0 version of the 3060 – USB Isolator while giving you access to all terminals and connectors through openings in the enclosure.

You can plug and unplug cables, connect and disconnect devices, without having to open the enclosure.

Male Berg Connector

The male berg connector is an optional component that can be easily crimped to an A201 sensor that has been trimmed in length.

URM ultrasound mounting bracket

This is our URM ultrasonic sensor mounting bracket. It fits URM37 and URM04.

Nano I / O Shield For Arduino Nano

Introduction

The Arduino Nano I/O Shield acts as a breadkout board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input and the footprint of the DFRduino board is the same as the Arduino Duemilanove. In addition, each pinout includes 5V and GND pins for easy connection to sensors or servos. Unit comes fully assembled. The board also has a space specifically for the DFRobot bluetooth module.

Servo Switch Harness 18"

This 18" (45 cm) harness has an inline on/off switch, with a 0.1" 3-pin female connector on one end and both a male and a female connector on the other.

Brass Liquid Solenoid Valve - 12V - 1/2 NPS

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally,

You are here

Applications

Product Specifications, Documents & More

Product Description

Description