Acrylic IR Stand with Hardware

This handy stand, made of smoke-colored 0.220” thick acrylic, makes it easy to mount a Sharp IR Distance Sensor to your project. Mounting hardware included.

Key Features:

Dark colored acrylic stand for the Sharp IR sensor
Includes all necessary mounting hardware
Vertical mounting holes for mounting to base material

Application Ideas:

Robot collision avoidance
Manufacturing process detection

Details

.220 thick laser cut, cast acrylic
Easy and attractive mounting of the #28015 PING))) Ultrasonic Sensor
Transparent acrylic allows the PING's LED to visibly shine through
Dimensions: 2.1 x 2.0 x .220 in. (.51 x .51 x 5.7 cm)
Operating temp range: -40 to +185 °F (-40 to +85°C)

Kit Contents:

1 - Acrylic IR Stand
2 - 1/16” Nylon spacers
2 - 1/4” Nylon spacers
2 - #4-40x5/8” black pan head screws
2 - #6-32x1/2” socket-head screws

Datasheet

Additional Information

SKU	ES000623
Manufacturer	Parallax

Buy now

Like us on Facebook

News from our store

Pololu Ball Caster with 1/2" Metal Ball

This ball caster uses a 1/2" diameter metal ball. The height of the assembled kit ranges from 0.5" to 0.8".

1128_0 - MaxBotix EZ-1 Sonar Sensor

Product Features
This analog sonar sensor measures the distance of an object using ultrasonic waves.

Product Description

The Sonar Sensor is a compact high performance ultrasonic rangefinder made by MaxBotix that can detect objects at a distance of 6 to 254 inches (6.45 m) with a 1 inch (25.4 mm)resolution. The sensor automatically calibrates itself when powered up.

Precision screwdrivers Phillips PG2-2/75 3x75

DC Barrel Jack Adapter - Female

Introduction

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.

ASSR-1228-002E MOSFET Relay

The ASSR-1228-002E is a Standard Solid State Relay with DPST-NO contacts and through hole terminals. This ASSR-12-series 2-form-A relay (Photo MOSFET) with an AlGaAs infrared

Power Supply 5,5V DC 180 mA - EU

Input: 100-240V, 150 mA; 50-60 Hz

Output: 5.5V, 180 mA

3260_0 - 12V/6.1Kg-cm/73RPM 50:1 DC Gear Motor

Product Features
This DC motor has a 50:1 gearbox, a rated speed of 73 RPM and rated torque of 6.12 Kg·cm.

Product Description

The 3260 is a 12 volt gear motor, generating 6.12 Kg-cm of torque at 73 RPM. While this motor is small and inexpensive, it is also aggressive- less efficient than the others, but very powerful for its size.

Pololu 5" Robot Chassis RRC04A Solid Light-Blue

This chassis base plate is a round piece of 1/8" (3 mm) acrylic with a 5" (127 mm) diameter and cutouts for building a differential-drive robot chassis based on our micro metal gearmotors and 42×19mm wheels. The chassis has assorted general-purpose holes and slots that support many configurations of sensors and other robot components.

3816_1 - Acrylic Enclosure for the 1066

This clear acrylic enclosure protects your Phidget and is assembled with a Phillips screwdriver.

MB7384 HRXL-MaxSonar®-WRST™

The weather resistant HRXL-MaxSonar-WR is a rugged ultrasonic sensor component module.

Pololu Ball Caster with 1/2" Metal Ball

This ball caster uses a 1/2" diameter metal ball. The height of the assembled kit ranges from 0.5" to 0.8".

Arduino Mega ADK Rev3

The Arduino Mega ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones.

Waterproof DS18B20 Digital temperature sensor

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125

Board of Education Shield (for Arduino)

Plug the Board of Education Shield into your own Arduino for convenient breadboard prototyping and servo ports, with no soldering required. Arduino programmers who appreciate Parallax's breadboard-friendly sensors and accessories will find them even easier to use with this shield.

Rechargeable NiMH Battery Pack: 3.6 V, 900 mAh, 3x1 AAA Cells, JR Connector

This is a rechargeable 3.6 V NiMH battery pack with a capacity of 900 mAh. The pack consists of three AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.

Screwless Terminal Block: 2-Pin, 0.2" Pitch, Side Entry

These wire-to-board terminal blocks automatically grip inserted wires, and release when their levers are pressed with a fingernail or small screwdriver. These blocks let you easily make temporary connections to your PCB.

0.100" (2.54 mm) Female Header: 1x10-Pin, Straight

This connector is a single-row, 10-pin, straight female header strip designed to match 0.1" male headers.

These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0.1" male header strips.

18B20 Temperature Sensor

While there are many types of temperature sensors available in the market, the DS18B20 Temperature Sensor form DALLAS is the best choice in applications which require high accuracy

M3 hex nut driver (5,5mm)

Relay Module (Arduino Compatible)

The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it

Tamiya 70101 Truck Tire Set (4 tires)

The Tamiya 70101 truck tire set contains four 36 mm-diameter wheels with hard, rubber, 16 mm-wide treads.

The Tamiya 70101 truck tire set includes the following:

1126_0 - Differential Gas Pressure Sensor ± 25kPa

Product Features
This differential gas pressure sensor plugs into an analog input and measures pressure from -25 kPa to 25 kPa.

Product Description

The Differential Pressure Sensor is a dual ported gas pressure sensor that measures the pressure difference between the two ports. It can measure both positive and negative pressure from –25kPa to +25 kPa.

TEXAS INSTRUMENTS - SN74LS00N - LOGIC, QUAD 2-IN NAND GATE, 14DIP

The SN74LS00N is a four independent 2-input Positive-NAND Gate. The devices perform the Boolean function Y = (A • B)\ or Y = A\ + B\ in positive logic.

TTL Input and Output Type
0.4/-16mA Output Drive (IOL/IOH) (Maximum)
Green Product, No Sb/Br

LDR, SERIES VT900 EXCELITAS TECH - VT90N2

This is a resistor that changes its resistance according to the light quantity that hits the sensor. With this kind of components you can make a device sensitive to light! Maybe you can save energy and money, can't you?

Triple Axis Accelerometer MMA7361

The MMA7361 from Freescale is a very nice sensor with easy analog interface. The MMA7361 is a 3.3V part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). It has selectable sensitivity by dip switch.

TPA81 - 8x1 Thermopile array

The TPA81 is a thermopile array detecting infra-red in the 2um-22um range. This is the wavelength of radiant heat. The Pyro-electric sensors that are used commonly in burglar alarms and to switch

IR Kit For Arduino

This IR kit provides a remote control capability to your project.

1125_0 - Humidity/Temperature Sensor

Product Features
This board combines an ambient temperature sensor and a humidity sensor and connects to two analog inputs.

Product Description

Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH. Measures Ambient Temperature in the range of -30°C to +80° C with a typical error of ±0.75°C in the 0°C to 80°C range.

Soil Moisture Sensor Immersion Gold

The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation. Electroless nickel immersion gold (ENIG) has several advantages over more conventional (and cheaper) surface platings

RS-232 to RS-485 Converter

This is a simple RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 is DB9 female connector, and the RS422 side is a DB9 male or 4 position terminal block.

Pololu Simple Motor Controller 18v7 (Fully Assembled)

The Pololu Simple Motor Controller 18v7 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. It ships with the power capacitor and connectors installed as shown.

SRF235 - "Pencil Beam" Ultrasonic Range Finder.

The SRF235 is a narrow beam ultrasonic ranger, with a beam width of just 15°. An industrial high frequency air coupled transducer operating at 235KHz is used for both Transmit and Receive.

ETH-RLY02 - 16Amp, 2 Channel Relay Module
Overview
The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12vdc.

CRYSTAL, 8.000MHZ, 18PF, HC-49S

The 9B-8.000MEEJ-B is a 10ppm Quartz Crystal with resistance welded and highly mass production capability.

Wire-To-Board Terminal Block

The PM5.08/2/90 BLK from Weidmuller is a through hole, 2 pole PCB terminal with leaf spring connection and 5.08mm pitch spacing. This terminal is used for wire size

Acrylic Ping))) Stand with Hardware

This handy stand, made of smoke-colored 0.220” thick acrylic, makes it easy to mount a PING))) Ultrasonic Distance Sensor (#28015) to your project. Mounting hardware included.

1040_0 - PhidgetGPS

Product Features

Measure global position, velocity and heading with the Phidget GPS. Best case accuracy of 2.5m CEP.

Product Description

The Phidget GPS provides the longitude and latitude of the board's position in signed decimal degree format. The position accuracy (best case) is 2.5m CEP (Circular Error of Probability).

The 1040 also provides altitude, heading and velocity as well as the time and date. It will also let you know when it has a satellite fix.

Micro Maestro 6-Channel USB Servo Controller (Assembled)

The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.

Pololu Qik 2s9v1 Dual Serial Motor Controller

This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial interface, making it easy to add motors to your microcontroller- or computer-based project. The motor supply voltage range is 4.5 to 13.5 V; the continuous current per channel is up to 1 A (3 A peak). The logic supply can be as low as 2.7 V, allowing operation with modern microcontrollers running at 3.3 V.

RESISTOR NETWORK, 1K

The Bourns 4600X series are thick film, resistor networks in single inline package. The number of resistor networks and configuration type are selected based on part numbering.

1134_0 - Switchable Voltage Divider

Product Features
This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just select the resistance you want and away you go.

Product Description

The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the voltage divider. The resistance values (in Ohms) are 249, 820, 2.61K, 8.45K, 27.4K, 91K, 300K and 1M. It is possible to have multiple switches flipped, putting the corresponding resistors in parallel.

Pololu Robot Chassis RRC01A Solid Red

The Pololu round robot chassis is a compact 5-inch base, laser-cut out of colored acrylic, designed for small mobile robots.

Adafruit Wave Shield for Arduino Kit - v1.1

Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to 22KHz, 12bit uncompressed audio files of any length. It's low cost, available as an easy-to-make kit. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read off of an SD/MMC card, which are available at nearly any store. Volume can be controlled with the onboard thumbwheel potentiometer.

1113_0 - Mini Joy Stick Sensor

Product Features

This two-axis joystick has a momentary pushbutton switch and connects to two analog and one digital input.

Product Description

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximately 500. When you move the Joystick from its center position the value will increase or decrease depending on the direction.

3142_0 - Half-bridge Steel Torque Strain Gauge (Bag of 2)

Designed for steel structures, this strain gauge comes in the half-bridge shear configuration.

HAMMOND - 1591GFLGY - ENCLOSURE, ABS, FLANGED, GREY

Product Information

ENCLOSURE, ABS, FLANGED, GREY
Enclosure Type: Multipurpose
Enclosure Material: Acrylonitrile Butadiene Styrene (ABS)

Mini Maestro 24-Channel USB Servo Controller (Assembled)

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed

Wire-To-Board Connector, Transition, Through Hole, Plug, 14, 2.54 mm, Gold Plated Contacts

Product Specifications, Documents & More

Contact Material: Copper Alloy
Contact Plating: Gold Plated Contacts
Contact Termination Type: Through Hole

1066_1 - PhidgetAdvancedServo 1-Motor

Control one RC servo motor or actuator with this controller board. Powered solely by your computer via USB.

1104_0 - Vibration Sensor

Product Features
The vibration sensor uses a piezoelectric element to measure vibration on a surface and connects to an analog input.

Product Description

This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages.

If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.

You are here

Additional Information

Product Specifications, Documents & More