0.100" (2.54 mm) Breakaway Male Header: 2x40-Pin, Straight

This connector is a double-row, 80-pin (2×40), straight male header strip that can be broken into smaller strips.

These 0.1" header strips are commonly used as low-cost connectors. The standard spacing allows use with solderless breadboards, perforated prototyping PCBs, and female headers such as those used on our Orangutan robot controllers. These header strips can easily be snapped into smaller strips to fit your application.

0.100" (2.54 mm) Breakaway Male Header: 2×40-Pin, Straight

Dimensions

Pins:	2 x 40
Spacing:	0.100 in

General specifications

Gender:	male
Pin type:	straight
Current rating:	3 A

BUY NOW

Like us on Facebook

News from our store

1018_2 - PhidgetInterfaceKit 8/8/8

The Phidgets workhorse. Connect analog sensors, control switches, and check on push-buttons. One board handles up to 24 devices.

The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor. For more information about these inputs and their connectors, have a look at the Analog Input Primer.

3583_0 - Rotary Potentiometer - WDA-D35-D4C

This industrial rotary potentiometer can rotate continuously and connects to an an analog input.

14,5 mm Strip 10 ways 2 pcs

Pair of 10 pin Female/Male header strips, very useful for Arduino board extensions. We use them extensively on Arduino Proto Shield PCB, but they are useful in any shield because of their height

Flush cutting nippers TR 30 15

Tool for a perfect clean and flush cut. It cuts the component lead at 1.5mm from the surface. Steel thickness 3.0mm. Tool length 138mm. ESD-safe handles version available .

3500_0 - i-Snail-VC-10 AC Current Sensor 10Amp

Product Features
The i-Snail VC-10 measures up to 10 amps AC on a wire that passes through its window. Connects to an analog input.

Product Description

The i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).

16mm Mini Lens 20 Degree Angle CCTV Camera Lens M12

16mm 20° angle board lens for CCTV cameras has standard M12x0.5 thread, suitable for both 1/3" and 1/4" CCD chipsets, with an aperture of F2.0.
Standard M12x0.5 thread
Image format for both 1/3" and 1/4" CCD

Kondo KRG-3 Gyro Sensor

It backs up stable automatic actions by accurate and quick detection of the angle and speed
The angular speed detected is output directly with analog voltage. It deals with various usage
Super compact and light : 22.5×12.5×7.8 mm, 1.8g

Rechargeable NiMH Battery Pack: 3.6 V, 900 mAh, 3x1 AAA Cells, JR Connector

This is a rechargeable 3.6 V NiMH battery pack with a capacity of 900 mAh. The pack consists of three AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.

Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)

The Pololu Simple High-Power Motor Controller 18v15 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 15 A without a heat sink. It ships with the power capacitor and connectors installed as shown.

A short U-bracket

Introduction

This is a high quality aluminum servo bracket (short), available in black anodized. Works great with Multi-Purpose Servo Bracket.

30:1 Micro Metal Gearmotor MP

Details

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 30:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.

Overview

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor

IIC LCD1602

Introduction

This is another great LCD display compatible with Gadgeteer modules from DFRobot. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The adress can be set from 0x20-0x27.Fantastic for Arduino or gadgeteer based projects.

DMX-USB-RX-RLY8 8 Relay, 0 Dimmer
Introduction
The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or 12V DC supply, provides 8 Relay outputs. These can be mechanical or solid state relays

TENMA - 72-7770 - MULTIMETER, DIGITAL, HAND HELD, 1999

DMM Functions: DC Current, Voltage, Resistance
Current Measure AC Max: -
Current Measure DC Max: 10A
Voltage Measure AC Max: 500V
Voltage Measure DC Max: 500V

IIC TO GPIO module

When Arduino is used for robots or interactive media, digital IO port is always found not enough? IIC now turn I / O modules to help you solve the problem, Arduino only two data lines

Ping))) Protector Stand

The PING))) Protector Stand is a precisely machined mounting bracket cut from ¼ in thick from high-grade aluminum. With easy installation this stand can gracefully attach your PING))) Ultrasonic Distance Sensor to your robot and protect the sensor from most collisions. Please note: PING))) Ultrasonic Distance Sensor (#28015) not included.

1116_0 - Multi-turn Rotation Sensor

Product Features

This multi-turn potentiometer measures 10 full rotations, useful for input applications that require a fine adjustment. Connects to an analog input.

Product Description

The 1116 measures 3600 degrees of rotation - 10 full turns. It is typically used in Human Interface Applications such as control panels.

M3 hex nut driver (5,5mm)

1 hex nut driver that is both suited for MakerBeam and OpenBeam products.

3142_0 - Half-bridge Steel Torque Strain Gauge (Bag of 2)

Designed for steel structures, this strain gauge comes in the half-bridge shear configuration.

Sharp IR Sensor Mounting Bracket

This mounting bracket is designed for Sharp distance measuring sensor

1041_0 - PhidgetSpatial 0/0/3 Basic

This spatial board had a 3-axis, ±8g accelerometer and connects to your computer via USB.

Acrylic Ping))) Stand with Hardware

This handy stand, made of smoke-colored 0.220” thick acrylic, makes it easy to mount a PING))) Ultrasonic Distance Sensor (#28015) to your project. Mounting hardware included.

Micro USB to Serial Adapter

Description

Micro USB to Serial Adapter is a usefull tool that allows to connect Personal Computers with any microcontroller system via the USB port. This tiny and lightweight board is only 19x13 mm, including the mini-B connector, and its weight is only 1,4 gr (0,05 oz). Interfacing is realized by two 0,100” strip connectors that are distant 0,600” (15,24mm); this allows a stable and easy mounting on solderless breadboard and sockets.

Pololu High-Power Motor Driver 24v23 CS

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 40 V voltage range and is efficient

GSM Antenna ANTH7100A0200AI1

Designed for providing effective GSM / GPRS /3G & 2.4GHz performance in indoor applications; this antenna is popular for in vehicle communications as both a versatile antenna for hands free car kits or in after market telemetry applications

Bag of 10 M3*6mm screw

DRV8824 Stepper Motor Driver Carrier, Low Current

The DRV8824 stepper motor driver carrier is a breakout board for TI’s DRV8824 microstepping bipolar stepper motor driver, a lower-current version of the DRV8825.

Lynxmotion Base Rotate Kit (no servos)

The Base Rotate Kit is perfect for rotating a large mass.

It can easily support 5lbs of weight, and has five 6mm bearings to reduce the friction.

Precision screwdrivers tamper resistant PG5-2 TR8x60

Soil Moisture Sensor (Arduino Compatible) Immersion Gold

Introduction

The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation. Electroless nickel immersion gold (ENIG) has several advantages over more conventional (and cheaper) surface platings such as HASL (solder), including excellent surface planarity (particularly helpful for PCB's with large BGA packages), good oxidation resistance, and usability for untreated contact surfaces such as membrane switches and contact points.

Input Output Expansion Shield For Arduino
Our IO expansion board is evolving, this latest V5 IO expansion shield is now supporting Xbee. It combines our popular Xbee shield with IO expansion shield(V4). It even supports SD card which provides the ultimate

Hexacopter Power Distribution Board

The Hexacopter PDB can be used with any frame. It distributes the power from the flight battery to six ESC's to power the motors. Now comes pre-assembled! No need to solder connectors

Sealed Membrane 4*4 button pad with sticker

The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.

AD Keyboard Module

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project.

Mini Thermal Receipt Printer

Add a mini printer to any microcontroller project with this very cute thermal printer. Thermal printers are also known as receipt printers, they're what you get when you go to the ATM or grocery store.

3551_0 - PC2121-5M pH Industrial Electrode

Product Features

This industrial electrode measures the pH of a solution and connects to the 1130 - pH/ORP Adapter.

Product Description

The 3551 is an economical combination electrode ideal for general industrial processes. It is well suited for testing pool water, sea water or underground water. It can also be used at high temperature in strong acid or base environments.

Phone Holder

The flexible and stable mechanical structure design enables this phone holder to hold different kinds of smart phone, PDA and other electronic devices.

RoboClaw 2x60A Motor Controller with USB (V4)

Overview

The RoboClaw from Ion Motion Control (formally Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor controller. It can supply two brushed DC motors with 5 A, 15 A, 30 A, or 60 A continuous (depending on the model) at voltages from 6 V to 34 V, and it allows for peak currents up to twice the maximum continuous rating.

The RoboClaw features dual quadrature decoding capability. A built-in PID routine can be used for closed-loop speed control, maintaining motor speeds even if the load varies, or the encoder counts and speeds can be read directly from the RoboClaw for use with an external control system. Analog feedback is also supported for closed-loop position control.

Bracket right angle 52 x 52 x 15 mm

3919_0 - T5577 RFID Tag - PVC Disc 15mm
A small PVC disc with an RFID tag embedded in it. T5577 tags must be written to before use.

BATTERY CONNECTOR, PP3 TYPE 1,150MM

The 440005P from Multicomp is a snap on connector/strap for use with PP3 battery.

Baby Orangutan B-328 Robot Controller

The Baby Orangutan B-328 is a very compact but complete robot controller, packing a high-performance ATmega328P AVR microcontroller (with 32 KB of program memory and 2 KB of RAM)

Nano I / O Shield For Arduino Nano

The Arduino Nano I/O Shield acts as a breadkout board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input and the footprint of the DFRduino

Motor 850Kv AC2830-358

APM:Copter basic motor, this motor is used by most APM:Copter developers. It is very reliable and creates a nice thrust with the 10x47 propellers.

Relay Shield for Arduino

The DFRobot Relay shield is capable of controlling 4 relays. The max switching power could be DC 90W or AC 360VA. It could be directly controlled by Arduino/DFRduino through digital IOs with external 9v supply.

Sealed Membrane 4*4 button pad with sticker

Introduction

The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.

Arduino Mega2560 Rev3

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header,

CRYSTAL, 4M, 18PF CL, HC49/U

Crystal Case: Through Hole, 11mm x 4.65mm
Frequency Nom: 4MHz
Frequency Stability + / -: 50ppm
Frequency Tolerance + / -: 30ppm

3258_0 - 12V/1.5Kg-cm/365RPM 10:1 DC Gear Motor

Product Features

This DC motor has a 10:1 gearbox, a rated speed of 365 RPM and rated torque of 1.53 Kg·cm.

Product Description

The 3258 is a 12 volt gear motor, generating 1.53 Kg-cm of torque at 365 RPM. While this motor is small and inexpensive, it is also aggressive- less efficient than the others, but very powerful for its size.

Tweezers 578 SA

Tweezers for gripping and assembly of cylindrical components with a diameter of 2 mm

You are here

Dimensions

General specifications

Details

Overview

Description

Overview