October 2016

Tactile Button switch (6mm) x 10 pack

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) a

RGB backlight negative LCD 20x4 + extras

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character

Round Solar Panel Skill Badge - 5V / 40mA

This skill badge is a self-fulfilling one! Normally you would get the badge after the project is done, but in this case, the badge can be part of the project! The solar panel is epoxied into a round disc 55mm diameter

Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll

Stainless Thin Conductive Yarn / Thick Conductive Thread - 30 ft

This 316L stainless steel thread falls somewhere between a thick thread and a thin yarn. Most sewing machines wouldn't be happy with this thread since its thick, and it has the 'furry' soft feel of yarn which makes

Standard LCD 20x4 + extras

Standard HD44780 LCDs are useful for creating standalone projects.

Tactile On/Off Switch with Leads

Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable

TTL Serial JPEG Camera with NTSC Video

This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC monochrome video and can take snapshots of that video

Bag of 10 M3*6mm screw

Bag of 10 M3*6mm screw

Bag of 10 M3 nuts

Bag of 10 M3 nuts

M3 hex nut driver (5,5mm)

1 hex nut driver that is both suited for MakerBeam and OpenBeam products.

M3 hex nut driver (5,5mm)

1 hex nut driver that is both suited for MakerBeam and OpenBeam products.

MakerBeam bracket 45 degreev

MakerBeam bracket 45 degree

MakerBeam bracket 60 degree

MakerBeam bracket 60 degree

MakerBeam eye plate kit

MakerBeam eye plate kit

Polymorph thermoplastic 100g

Polymorph thermoplastic can be reduced to a mouldable condition by immersion in hot water of around 60ºC. The material then turns from opaque to a clear substance. When warm and in mouldable condition

Polystyrene sheet - 300mm x 200mm x 3mm

Polystyrene is easy to work with.

You can drill or saw the material quite easily.

Acrylic IR Stand with Hardware

This handy stand, made of smoke-colored 0.220” thick acrylic, makes it easy to mount a Sharp IR Distance Sensor  to your project. Mounting hardware included.

Acrylic Ping))) Stand with Hardware

This handy stand, made of smoke-colored 0.220” thick acrylic, makes it easy to mount a PING))) Ultrasonic Distance Sensor (#28015) to your project. Mounting hardware included.

Board of Education Shield (for Arduino)

Plug the Board of Education Shield into your own Arduino for convenient breadboard prototyping and servo ports, with no soldering required. Arduino programmers who appreciate Parallax's breadboard-friendly

ColorPAL

For sensing color, the ColorPAL uses its LED to illuminate a sample, one color component at a time, along with a broad-spectrum light-to-voltage converter to measure the light reflected back.

HomeWork Board - USB

The BASIC Stamp HomeWork Board is ideal for learning circuits, electronics, and microcontroller programming. The solderless breadboard makes it easy to connect 5 V compatible sensors, displays, LEDs

Parallax USB to Serial (RS-232) Adapter with Cable

Parallax has designed a USB to Serial (RS-232) adapter that is compact and economical to provide a Virtual Com Port for all of our products that have a DB9 (9-pin) serial connector. Cable included.

Ping))) Protector Stand

The PING))) Protector Stand is a precisely machined mounting bracket cut from ¼ in thick from high-grade aluminum. With easy installation this stand can gracefully attach your PING))) Ultrasonic Distance Sensor

PING))) Ultrasonic Distance Sensor

Our PING)))™ ultrasonic sensor provides an easy method of distance measurement. This sensor is perfect for any number of applications that require you to perform measurements between moving or stationary

Propeller Board of Education

The form of the original Board of Education meets the powerful function of the multicore Propeller microcontroller. A built-in set of peripherals makes it ready to support an amazing array of projects, prototypes

Propeller C3

The C3 is a true “Credit-Card–sized Computer” that augments the Propeller chip with a number of onboard peripherals to facilitate large scale and complex applications.

RFID Card Reader Serial

The RFID Reader Module can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, robotics, navigation, inventory tracking, payment systems

RFID Card Reader USB

The RFID Reader Module USB can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, navigation, inventory tracking and payment systems.

RFID R/W 54 x 85 mm Rectangle Tag

This RFID Read/Write transponder tag is part of the EM Microelectronic-Marin SA EM4x50 family and is designed to work with our RFID Read/Write Module, Serial (#28440). Each tag contains a unique, read-only seria

Pages