September 2016

Snap-Action Switch with 16.3mm Roller Lever: 3-Pin, SPDT, 5A

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot.

Stepper Motor: Bipolar, 200 Steps/Rev

This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 2.7 V, allowing for a holding torque of 1.4 kg-cm (20 oz-in).

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev

This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque

Toggle Switch: 3-Pin, SPDT, 5A

This heavy duty single-pole, double-throw (SPDT) toggle switch makes a great power switch or state selector for user interfaces. It is rated for 5 A at 125 VAC and 2 A at 250 VAC.

VNH5019 Motor Driver Carrier

This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM,

14,5 mm Strip 10 ways 2 pcs

Pair of 10 pin Female/Male header strips, very useful for Arduino board extensions. We use them extensively on Arduino Proto Shield PCB, but they are useful in any shield because of their height

14,5 mm Strip 6 ways 4 pcs

Four pcs of 6 pin Female/Male header strips, very useful for Arduino board extensions. We use them extensively on Arduino Proto Shield PCB, but they are useful in any shield because of their height

Arduino DUE

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output

Arduino Ethernet Shield Rev3 WITHOUT PoE Module

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP

Arduino Leonardo without headers

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator,

Arduino Leonardo with Headers

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator

Arduino Mega ADK Rev3

The Arduino Mega ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones.

Arduino Mega2560 Rev3

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports)

Arduino Mini 05

The Arduino Mini is a small microcontroller board intended for use on breadboards and when space is at a premium. The revision 05 has a new package for the ATmega328, which enables all components

Arduino UNO Rev3

The Arduino Uno R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator,

ATMega328 - Microcontroller

ATMega328 is the ATMEL Microcontroller on which Arduino UNO is based.

This product let you to realize your small project without using a full size Arduino board. To make this microcontroller working with the Arduino IDE

Box for Arduino

The Box for Arduino is the perfect enclosure for any Arduino project: the internal mounting plastic pins are designed to fit in all Arduino boards.

Communication Shield (XBee, Bluetooth, RFID)

This shield allows to use XBee modules or our Bluetooth or RFID modules.

LDR, SERIES VT900 EXCELITAS TECH - VT90N2

This is a resistor that changes its resistance according to the light quantity that hits the sensor. With this kind of components you can make a device sensitive to light! Maybe you can save energy

10 Yellow LED 5mm

10 Yellow Leds to bright up your projects. Low power consumption. Popular T-1 3/4 diameter package. General purpose leads. Reliable and rugged.

10 Green LED 5mm

10 Green LEDs to bright up your projects.

10 Red LED 5mm

10 Red LEDs to bright up your projects.

LilyPad Programming Cable

This cable allows to program an Arduino LilyPad board with an USB/serial converter.

PoE Module 12V

The Ag9120-S is a module designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard.

Arduino 2009 Shield - Motor PCB

PCB to mount: it allows to Arduino boards to drive 2 12V DC motors

Shield - Wireless SD Shield

The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint.

USB 2 Serial Converter (USB Mini)

This board converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer.

Mini USB Adapter Light

This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL

Arduino Micro

The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs

Arduino Nano

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package

Pages