April 2015

Camy, simply plug and record

27/04/2015

Camy is a camera and a digital recorder all in one.

Is easy to use, you just power it.

Like us on Facebook

News from our store

Pololu Micro Serial Servo Controller (assembled)

At only 0.91" x 0.91", the Pololu micro serial servo controller is the smallest serial servo controller you’ll find. With individual speed and range control of eight servos and over 12 bits of resolution,

1044_0 - PhidgetSpatial Precision 3/3/3 High Resolution

The PhidgetSpatial Precision 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one convenient package. It has enhanced precision in the accelerometer when measuring less than ±2g, and enhanced gyroscope precision at speeds less than 100°/s. The transition from high precision to low precision mode and back is completely seamless and automatic.

DRV8801 Single Brushed DC Motor Driver Carrier

This tiny breakout board for TI’s DRV8801 provides a modern alternative to classic motor drivers such as the L293D, SN754410, and L298N. It can deliver a continuous 1 A (2.8 A peak) to a single motor and offers a wide operating voltage range of 8 to 36 V.

Female Berg Receptacle

The female berg connector is an optional component that easily connects A201 sensors (which have a male pin termination) to discrete wires or another flexcircuit.

50:1 Micro Metal Gearmotor HP 6V

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output sh

ALPHA 16mm Rotary Potentiometer 10 K Ohm

Conductive thread ribbon cable - White - 1 yard

Description

This lightweight, flexible fabric ribbon cable contains four channels of conductive thread, perfect for wiring up wearables where flexibility is key. Use it to connect your conductive fabric gamepad to your microcontroller or computer!

Analog Rotation Sensor

This V2 Rotation Sensor is arduino compatible multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. The voltage can be subdivided into 1024 copies.

IIC TO GPIO module

When Arduino is used for robots or interactive media, digital IO port is always found not enough? IIC now turn I / O modules to help you solve the problem, Arduino only two data lines

3027_0 - LCD cable (for 40x4 Screen)

This is the replacement cable for the following LCD Screen:

Precision screwdrivers Phillips PG2-1 2.5x60

1136_0 - Differential Gas Pressure Sensor ±2 kPa

This differential gas pressure sensor plugs into an analog input and measures pressure from -2 kPa to 2 kPa.

Aluminum Multi-Purpose Servo Bracket

Introduction

High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs.

3-wire Serial LCD Module

This LCD module uses a 128x64 liquid crystal display that support Chinese character , English characters and even graphics. It is suitable for interactive work with Arduino.

Precision screwdrivers slot PG1-4 3x100

3915_0 - T5577 RFID Tag - PVC Card

A credit card sized T5577 RFID tag. Fits in standard wallets. Needs to be written to before use.

3035_0 - Cable for HKT22 Encoder

For use with the HKT22 encoder.

Mini Photocell

Introduction

This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor.

It changes resistance depending on the amount of light it is exposed to. These little sensors can be used in light-interacting projects.

Premium Jumper Wire 5-Piece Rainbow Assortment F-F 12"

These premium jumper wires are stranded 26 awg wires with female terminations on both ends, for use with 0.1" (2.54 mm) male headers. The assortment of 12" (30 cm) wires

1145_0 - 5V to ±12V Sensor Adapter

Phidgets mostly run on 5V, but if you have a ±12V sensor you can use this adapter.

ACS714 Current Sensor Carrier -30 to +30A

This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)

The Pololu Simple High-Power Motor Controller 18v15 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB.

SRF485WPR - RS485 Sonar with Weatherproof Transducer

The SRF485WPR is a water resistant single transducer ultrasonic ranger. The SRF485WPR uses the RS485 standard for communications, for up to 127 modules on each RS485 bus

ACS714 Current Sensor Carrier -5A to +5A

This board is a simple carrier of Allegro’s ±5A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

Pololu Simple Motor Controller 18v7 (Fully Assembled)

The Pololu Simple Motor Controller 18v7 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. It ships with the power capacitor and connectors installed as shown.

VNH5019 Motor Driver Carrier

This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.

Female Crimp Pins for 0.1" Housings 100-Pack

These female pins can be crimped on 22-28AWG wires and snapped into our crimp connector housings to create custom cables that are compatible with standard 0.1"-pitch headers and solderless

SOCKET IC, DIL, 0.3", 18WAY

The 1-390261-5 is a 18-way DIP Socket with 30% glass filled PBT, thermoplastic housing and tin-plated phosphor bronze contacts.

Servo extension cable 300mm

Introduction

This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1" jumper cable.

Graphic ST7565 Positive LCD

This graphical display looks great, costs less! The dark gray pixels are visible in daylight, and there's also a full RGB LED backlight, which you can control with PWM to make any color you can imagine.

3206_0 - SpringRC Micro Servo (SM-S2313M)

This tiny servo has 180° of travel and weighs 14g, making it ideal for applications where size and weight matter.

Lynxmotion Wrist Rotate Upgrade (Medium Duty)

• Medium duty wrist rotate upgrade for the arms
• Uses HS-225MG servo for rotation (included)
• Adds 1.325'' to length/reach of arm

Tactile On/Off Switch with Leads

Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable

Waterproof DS18B20 Digital temperature sensor

Introduction

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.Usable with 3.0-5.5V systems.

Polystyrene sheet - 300mm x 200mm x 3mm

Polystyrene is easy to work with.

You can drill or saw the material quite easily.

PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+

PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2V.

Like our popular 5V 1A USB wall adapter, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' long cables, high draw, the addition of a diode on the output if you wish, etc. The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.

Robotics Shield Kit (for Arduino)

Make your Arduino the onboard brain of a mobile robot and learn robotics, electronics, and programming with this versatile kit and its accompanying step-by-step lessons. The Board of Education Shield plugs

6xAA Battery Holder(double layer)

This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.

Linear Actuator with built in Potentiometer

Built in limit switches (non moveable)
Aluminum case
Two clevis mounting points, one on each end (uses our MB1 brackets)

3202_0 - Hitec HSR-1425CR Continuous Rotation Servo

Product Features
For applications where a finite range of motion is not acceptable, use this continuous rotation servo.

Circular Connector Contact, Buccaneer®, Pin, 28 AWG (10 Pack)

The SA3180/1 is a 12-way Buccaneer® solder Pin Contact with 24 to 28AWG cable acceptance, made of copper with gold finish.

3260E_0 - 12V/6.1Kg-cm/73RPM 50:1 DC Gear Motor w/ Encoder

This DC motor has an encoder, a 50:1 gearbox, a rated speed of 73 RPM and rated torque of 6.12 Kg·cm.

RFID Card Reader Serial

The RFID Reader Module can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, robotics, navigation, inventory tracking, payment systems, and car immobilization

1.5KE47CARL - TRANSIL 1500W 47V BIDIR DO-201

TRANSIL 1500W 47V BIDIR DO-201

Relay Shield

The Relay Shield is an Arduino compatible module that provides an easy way to control high voltage thanks to 4 independent channels equipped with photo-coupled mechanical relays preassembled on the board.

Heli-Max Axe CX Nano 2.4GHz RTF Yellow

Heli-Max electric powered, 2.4GHz radio controlled, ready to fly, Axe CX Nano sized Helicopter. Ideal for first-time pilots.

RESISTOR NETWORK, 330R

MSL: -
Network Circuit Type: Bussed
No. of Elements: 8
No. of Pins: 9
Power Rating per Element: 200mW

10 Red LED 5mm

10 Red LEDs to bright up your projects.

Pololu Ball Caster with 1/2" Metal Ball

This ball caster uses a 1/2" diameter metal ball. The height of the assembled kit ranges from 0.5" to 0.8".

UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output

Your power supply problems just got SOLVED! This little circuit board may look tiny but inside is a high efficiency DC/DC step-down converter which can output up to 3 Amp at 5V without the need of any heat-sink or forced cooling

You are here

April 2015

Camy, simply plug and record

Description